North & South America +1 609.865.5965
International +44 203.3188.599
For Testing Avionics Indoors
Accessories
-
1:1 Redundant Switch | Model 2040
The Model 2040 provides 1:1 redundant switching for Sat-Light TM Interfacility Link products, including the IF and L-Band product lines. The Model 2040 supercedes the Model 2000 Switch and is backward compatible, integrating into existing systems. The Model 2040’s many features allow the operator to configure the product to meet demanding system requirements. The Model…
-
1:1 Redundant Switch | Model 2040-CXU
Model 2040-CXU Switch is a 1:1 redundancy switch used with Global Foxcom’s Sat-Light’s Interfacility Link products. The 2040-CXU Switch utilizes internal switching logic which can be configured to detect and switch on optical or RF fault conditions. The unit consists of a coaxial relay switch and associated logic capable of operating both in automatic and…
-
10/100 Base Ethernet Module | GL75E
The 10/100 Base Ethernet Module brings fast Ethernet capability to the Global Foxcom Sat-Light systems. Using only one single-mode optical fiber, the unit transmits either 10Base or 100Base data over distances up to 20 kilometers. Model 2020A transmits at 1310 nm, while Model 2021A transmits at the 1550 nm window. This easy to install, plug-and-play…
-
Apogee SNMP Management System | 2052-7182
Apogee SNMP Management System provides support for all Sat-Light fiber optic modules, redundancy switches and power supplies. The Apogee SNMP Management System is built on a rack-mounted module and an integrated graphical SNMP manager.
-
Digital Link | GL75P
Sat-Light/Gold DGP Link offers a high performance, cost effective alternative to conventional coaxial, cable-based distribution systems. Sat-Light/Gold GL75-1PPS Link is designed to transfer any signal (analogue or digital) with a frequency of up to 30MHz. 1PPS as well as other sync or data signals can be transported over long distances. Global Foxcom uses a high…
-
Fiber Optic Data Transceiver | Model 7050
Model 7050 is a complete duplex fiberoptic link for data transmission. The Model 7050 Fiberoptic Data Transceiver provides the capability to Monitor and Control (M&C) on-site communication equipment such as testing and measuring equipment, redundancy switches, antenna pedestals, broadcast equipment, etc. With the Model 7050 you can easily locate problems and choose pre-determined solutions. The…
-
RF Amplifier | Model 2100
The Model 2100 is 75-Ohm 30 dB amplifier with a high first order intercept point and a high power output at the 1 dB compression point. The Model 2100 covers the Sat-Light RF frequency range from 10 – 2400 MHz. The Model 2100 RF Amplifier provides the capability to integrate a pre- or post-amplifier as…