GPS Repeater Kit for Hangars
Moving aircraft outdoors to test satellite navigation introduces costly operational delays, labor expenses, and safety risks. Global Foxcom GNSS Repeater Kit for Aircraft Hangars eliminates this by re-transmitting live GPS, GLONASS, and Galileo signals directly inside your facility. This complete hardware solution enables maintenance teams to validate avionics instantly without towing the aircraft.
Features & Benefits
- Filtered 1164–1610 MHz GNSS frequency range
- System gain from 28-58 dB with calibrated 1 dB steps
- Band-pass filtering to block unwanted off-air signals
- Antenna RX monitoring for open or over-current conditions
- Over-gain and oscillation limiter to protect signal performance
- Two indoor antenna outputs for single-zone or dual-zone coverage
- Total indoor coverage up to 1500 m²
- Standard omni antenna kit
- Directional RHCP antenna kit
- Daisy-chain coupling port for expanded coverage areas
- Supplied with 10 m LMR240 RF cables
Global Foxcom’s GPS Repeater Kit for Hangars is built around the Mini GNSS smart module and supplied as a ready-to-install system with an outdoor receive antenna, indoor transmit antenna options, RF cabling, and an AC-to-DC power adapter. The kit is available for both standard indoor spaces and high-ceiling facilities where signal direction is important.
For aircraft maintenance hangars, the directional RHCP antenna option helps focus retransmitted GNSS signals into defined testing areas, while dual-zone configurations support coverage across two indoor areas from one kit. Calibrated gain control, antenna monitoring, and built-in signal protection help installation teams maintain stable indoor GNSS coverage with greater control over signal behavior. The kit is available in dual-zone configurations with omni or directional indoor antennas.
Basic Details
| RF Specification | Value |
| Frequency Range – Bandwidth | 1616-1626.5MHz |
| Noise Figure | < 2dB |
| Amplitude Response @ Unity Gain | 50dB variable |
How is coverage expanded beyond the base kit?
Additional Mini GNSS modules are connected through the coupling port in a daisy-chain configuration, helping extend the indoor GNSS distribution network across larger facilities.
Are fiber optic repeater options available for remote antenna placement?
Yes. Optional fiber optic repeaters are available for remote and flexible placement of outdoor antennas. This reduces RF transmission loss, improve signal quality, provide lightning protection, and support safer, easier installation.
Which RF connector type is used by the GPS Repeater Kit?
The kit uses TNC female RF connectors across the module and antenna/cable interfaces.
Make an inquiry