The PL7620 RF Amplifiers provide the capability to integrate a pre- or post-amplifier as a part of the IFL system. Using an RF Amplifier allows a full system solution with guaranteed overall system performance over long distances. Pre-amplifier the PL7620 ensures a high C/N by providing the optical transmitter with sufficient RF to optimally drive the laser…
Global Foxcom provides both chassis and standalone power supplies to be used with its Satcom fiber optic Interfacility Links (IFL). The chassis supports 8 cards, incorporating “hot swap” capabilities. The 7180M chassis uses the 7001P switching supply. The chassis is a standard 19 inch, 3U configuration. The chassis contains two slots located on the right…
The PL7641 5-10MHz/L-Band diplexer is a passive unit used to separate or combine 5-10MHz reference signals to an L-Band signal.
The PL7630 RF Amplifiers provide the capability to integrate a pre- or post-amplifier as a part of the IFL system. The RF Amplifier guarantees a full system solution with overall system performances over long distances. Pre-amplifier the PL7630 helps ensures a high C/N by providing the optical transmitter with sufficient RF to optimally drive the laser. Post-amplifier, the…
Apogee SNMP Management System provides support for all Sat-Light fiber optic modules, redundancy switches and power supplies. The Apogee SNMP Management System is built on a rack-mounted module and an integrated graphical SNMP manager.
Sat-Light C-Band fiber optic interfacility links transmit and receive downlink signals in the 3.4─4.2 GHz range between antennas and control rooms or NOCs. Global Foxcom’s IFLs offer a high performance alternative to conventional coaxial-cabled systems, reducing the need for wave-guide and minimizing signal attenuation. The Sat-Light IFLs function as a transparent link, transmitting all…
Global Foxcom’s Platinum C-Band products are designed to provide full specification service up to a full 4dB optical budget at low cost.
Global Foxcom’s Platinum C-Band products are designed to provide full specification service up to a full 4dB optical budget at low cost.
Sat-Light C-Band fiber optic interfacility links transmit and receive uplink signals in the 5.8─6.8 GHz range between antennas and control rooms or NOCs. Global Foxcom’s IFLs offer a high performance alternative to conventional coaxial-cabled systems, reducing the need for wave-guide and minimizing signal attenuation. The Sat-Light IFLs function as a transparent link, transmitting all…
The Global Foxcom compact AL6R-66-CWDM receiver converts incoming signals from Global Foxcom’s optical AL6T-66-CWDM transmitter into 6 RF outputs. This cost-effective solution boasts a large optical input window and linear performance, enabling it to distribute up to 6 high-quality, L-Band (200-2400MHz) TV signals to multiple dwelling units. The receiver is designed with internal CWDM to…
The AL6T-66-CWDM transmits multiple satellite TV signals to multiple homes over a single optical fiber. This compact solution, which boasts 6 expanded L-band (200-2400MHz) inputs, is capable of supporting a variety of satellite television platforms. This transmitter is equipped with 6 dedicated DFB lasers to ensure stability and integrity of the signal. The internal multiplexer…
Global Foxcom’s Coarse Wavelength-Division Multiplexer (CWDM) can combine up to 8 fiber outputs from Global Foxcom fiber optic transmitters into one single fiber (RFoF). Each transmitter transmits on a different optical wavelength. CWDM technology uses ITU standard 20 nm spacing between the wavelengths, from 1470 nm to 1610 nm. Each wavelength is transmitted on a separate…