RF Over Fiber Links

RF over Fiber platforms that meet all your Earth Station Needs:
Platinum Series:		Gold Series:
Global Foxcom’s Advanced Platinum RFOF platform, houses Digital Control for RF links, embedded optical/RF power meter, 12/24 “hot-swap”modules per 3RU chassis with support for up to 6GHz, built in SNMP for monitoring, variety of data links and a suite of RF accessories.		Global Foxcom’s Classic Gold RFOF platform, provides the Gold Standard in reliability and performance, up to 8 RFOF “hot-swap” modules per 3RU chassis with a capacity up to 18GHz, SNMP monitoring option, variety of data links and a suite of RF accessories.

5-10MHz/L-Band Diplexer | PL7641

The PL7641 5-10MHz/L-Band diplexer is a passive unit used to separate or combine 5-10MHz reference signals to an L-Band signal.
Read More
55dB Gain RF Amplifier | PL7630

The PL7630 RF Amplifiers provide the capability to integrate a pre- or post-amplifier as a part of the IFL system. The RF Amplifier guarantees a full system solution with overall system performances over long distances. Pre-amplifier the PL7630 helps ensures a high C/N by providing the optical transmitter with sufficient RF to optimally drive the laser. Post-amplifier, the…
Read More
Apogee SNMP Management System | 2052-7182

Apogee SNMP Management System provides support for all Sat-Light fiber optic modules, redundancy switches and power supplies. The Apogee SNMP Management System is built on a rack-mounted module and an integrated graphical SNMP manager.
Read More
C-Band Optical Downlink | GL952CD

Sat-Light C-Band fiber optic interfacility links transmit and receive downlink signals in the 3.4─4.2 GHz range between antennas and control rooms or NOCs. Global Foxcom’s IFLs offer a high performance alternative to conventional coaxial-cabled systems, reducing the need for wave-guide and minimizing signal attenuation. The Sat-Light IFLs function as a transparent link, transmitting all…
Read More
C-Band Optical RF Down Link | PL7CD30T / PL7CD30R4

Global Foxcom’s Platinum C-Band products are designed to provide full specification service up to a full 4dB optical budget at low cost.
Read More
C-Band Optical RF Uplink | PL7CU30T / PL7CU30R4

Global Foxcom’s Platinum C-Band products are designed to provide full specification service up to a full 4dB optical budget at low cost.
Read More
C-Band Optical Uplink | GL952CU

Sat-Light C-Band fiber optic interfacility links transmit and receive uplink signals in the 5.8─6.8 GHz range between antennas and control rooms or NOCs. Global Foxcom’s IFLs offer a high performance alternative to conventional coaxial-cabled systems, reducing the need for wave-guide and minimizing signal attenuation. The Sat-Light IFLs function as a transparent link, transmitting all…
Read More
CWDM Multiplexer & Demultiplexer

Global Foxcom’s Coarse Wavelength-Division Multiplexer (CWDM) can combine up to 8 fiber outputs from Global Foxcom fiber optic transmitters into one single fiber (RFoF). Each transmitter transmits on a different optical wavelength. CWDM technology uses ITU standard 20 nm spacing between the wavelengths, from 1470 nm to 1610 nm. Each wavelength is transmitted on a separate…
Read More
Digital Link | GL75P

Sat-Light/Gold DGP Link offers a high performance, cost effective alternative to conventional coaxial, cable-based distribution systems. Sat-Light/Gold GL75-1PPS Link is designed to transfer any signal (analogue or digital) with a frequency of up to 30MHz. 1PPS as well as other sync or data signals can be transported over long distances. Global Foxcom uses a high…
Read More
DWDM Multiplexer & Demultiplexer | Series 33000

Dense Wavelength-Division Multiplexer (DWDM) can combine up to 80 fiber outputs from Global Foxcom’s fiber optic transmitters into one single fiber (RFoF). Each transmission is on a different optical wavelength. DWDM technology uses ITU standard 1.6nm spacing between wavelengths. Each wavelength is transmitted on a separate single mode fiber optic cable and then multiplexed onto…
Read More
DWDM/CWDM Long Distance SFP

Global Foxcom’s Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device plugs into a Gigabit Ethernet port or slot. The SFP device supports up to 1 GB of data rate and is available with CWDM/DWDM wavelengths in single/dual fiber configuration. The SFP is available in 20, 40, 60 and 120Km fiber versions.
Read More
EXTENDED L-BAND FIBER OPTIC LINK | PL7240ET / PL7240ER

High RF input power and wide dynamic range make the link suitable for both Uplink and Downlink applications.
Read More

Filters

RF Over Fiber Links