Mini GNSS L1 Dual-Zone Repeater Kit
Global Foxcom’s Mini GNSS L1 Dual-Zone Repeater Kit retransmits live GPS L1, GLONASS G1, Galileo E1, and BeiDou B1 signals across two indoor coverage zones. The ready-to-install coaxial kit is designed for standard-ceiling environments, including offices, manufacturing sites, and emergency facilities. Two omnidirectional indoor transmit antennas distribute GNSS signals across the planned coverage areas from a single outdoor receive point.
Features & Benefits
- Filtered 1164–1610MHz GNSS frequency range
- Supports GPS L1, GLONASS G1, Galileo E1, and BeiDou B1
- Two omnidirectional transmit antennas for dual-zone coverage
- Broad indoor GNSS signal distribution for standard-ceiling environments
- Total indoor coverage up to 1,500 m²
- 28–58db system gain with calibrated adjustment in 1dB steps
- Band-pass filtering blocks unwanted off-air signals
- Receive-antenna monitoring detects open and over-current conditions
- Over-gain and oscillation limiter reduces the risk of RF misalignment
- Coupling port connects additional Mini GNSS modules in a daisy-chain arrangement
- Three 10 m LMR240 coaxial cables included
- AC-to-DC power adapter included
- 12VDC operating voltage
- TNC female RF connections
- Operating temperature from −10°C to +65°C
- Standard 5-year warranty
The Mini GNSS L1 Dual-Zone Repeater Kit uses a coaxial RF architecture to retransmit GNSS signals from an outdoor receive antenna to two indoor omnidirectional transmit antennas. This configuration provides broad signal distribution across separate indoor areas and is designed for standard-ceiling environments where coverage is required across offices, manufacturing facilities, and emergency facilities. The complete kit includes the Mini GNSS repeater module, outdoor receive antenna, two omnidirectional indoor transmit antennas with articulating mounts, three 10 m LMR240 RF coaxial cables, and an AC-to-DC power adapter.
During installation, the calibrated gain adjustment provides 28–58dB system gain with 1dB steps for RF level configuration. Integrated band-pass filtering blocks unwanted off-air signals, while receive-antenna monitoring identifies open and over-current conditions. The over-gain and oscillation limiter supports stable RF operation, and the coupling port enables additional Mini GNSS repeater modules to be connected in a daisy-chain arrangement when more indoor antenna points are required. Compatible cabling and power components are available through GNSS Repeater Accessories.
| Specification | Value |
| GNSS RF Repeater System | |
| System frequency range | 1164–1610MHz (Filtered) |
| Satellite support | GPS L1, Glonass G1, Galileo E1, Beidou B1 |
| System gain | 28-58dB (Calibrated, 1dB steps) |
| Supported indoor antenna | 2 |
| Outdoor antenna type | Global Foxcom RX L1/G1/E1 |
| Indoor antenna type support | GF Omni TX L1/G1/E1 or Foxcom Directional TX L1/G1/E1 |
| Supplied antenna cable/length/type | 3 x LMR240, 10Meter |
| Electrical Specification | |
| Operating voltage/current consumption | 12VDC/0.3A |
| Antenna RX antenna monitoring | Open/Over Current |
| Coupling port voltage | 12VDC ±.5V |
| Physical Specifications | |
| Operating temperature | -10°C – +65°C |
| Storage temperature | -40°C – +80°C |
| Humidity | 95% @ 35°C Non-condensing |
| RF connectors | TNC Female |
Which GNSS signals does the kit retransmit?
The kit retransmits GPS L1, GLONASS G1, Galileo E1 and BeiDou B1 signals within its filtered 1164–1610 MHz frequency range.
How does the kit provide dual-zone indoor GNSS coverage?
The repeater distributes the supported signals through two RF outputs connected to separate omnidirectional indoor transmit antennas. Each antenna serves one indoor coverage zone.
How is the system gain adjusted?
A calibrated DIP-switch array provides system gain adjustment from 28–58db in 1db steps during installation.
How does the kit monitor the outdoor receive antenna?
The repeater monitors the outdoor receive-antenna connection for open and over-current conditions.
Where is the standard Dual-Zone Kit typically installed?
The omnidirectional antenna configuration is designed for standard-ceiling environments, including offices, manufacturing sites and emergency facilities requiring GNSS reception in two indoor areas.
How is the system expanded beyond two indoor antenna points?
The coupling port supports additional Mini GNSS repeater modules in a daisy chain arrangement, extending the number of indoor antenna points within the installation.
What equipment is included in the Mini GNSS L1 Dual-Zone Repeater Kit?
The kit includes one Mini GNSS repeater module, one outdoor GNSS receive antenna, two omnidirectional indoor transmit antennas with articulating mounts, three 10 m LMR240 coaxial cables and an AC-to-DC power adapter.