L1 Dual Zone Hangar Mini GNSS Kit
Global Foxcom’s L1 Dual Zone Hangar Mini GNSS Kit retransmits live satellite navigation signals into two indoor coverage zones within aircraft maintenance facilities. Its directional RHCP antennas concentrate transmission toward selected reception areas from high mounting positions. The kit combines a Mini GNSS repeater with the antennas, coaxial cabling, and power adapter required for installation.
Features & Benefits
- Supports GPS L1, GLONASS G1, Galileo E1, and BeiDou B1
- Filtered GNSS system frequency range of 1164–1610 MHz
- Calibrated system gain of 28–58db with adjustment in 1db increments
- DIP-switch array for installation-stage RF gain configuration
- Integrated band-pass filtering to reject unwanted off-air signals
- Receive-antenna monitoring for open and over-current conditions
- Over-gain and oscillation limiter for RF output protection
- 12VDC operation with specified current consumption of 0.3A
- TNC female RF connections
- Operating temperature from −10°C to +65°C
- Humidity tolerance of 95% at 35°C, non-condensing
- Standard 5-year warranty
The L1 Dual Zone Hangar Mini GNSS Kit forms part of the Mini GNSS Repeater Kits range, establishing a coaxial RF distribution path between an outdoor receive antenna and separate indoor transmit points. The repeater feeds both zones from a common satellite input, extending reception into designated aircraft maintenance areas. This arrangement separates outdoor signal acquisition from indoor retransmission while retaining a shared reception source.
Placement of the kit’s GNSS Antennas should consider cable attenuation, antenna orientation, and the propagation path to receiving equipment. Mounting height and structural obstructions influence the reception footprint, making coverage assessment at the intended aircraft positions an important part of commissioning. Matching the installation to these conditions supports GNSS availability where maintenance activities take place.
| GNSS Repeater System – RF Specification | |
| System frequency range | 1164–1610 MHz (Filtered) |
| Satellite support | GPS L1, GLONASS G1, Galileo E1, BeiDou B1 |
| System gain | 28–58 dB (Calibrated, 1 dB steps) |
| Supported indoor antennas | 2 |
| Outdoor antenna type | Global Foxcom RX L1/G1/E1 |
| Supported indoor antenna types | GF Omni TX L1/G1/E1 or Foxcom Directional TX L1/G1/E1 |
| Supplied antenna cables | 3 × LMR240, 10 m each |
| Electrical Specification | |
| Operating voltage / current consumption | 12 VDC / 0.3 A |
| RX antenna monitoring | Open / Over-current |
| Coupling port voltage | 12 VDC ±0.5 V |
| Physical Specifications | |
| Operating temperature | −10°C to +65°C |
| Storage temperature | −40°C to +80°C |
| Humidity | 95% at 35°C, non-condensing |
| RF connectors | TNC Female |
Make an inquiry