Skip to main content

RF Components

Foxcom offers a range of RF products, such as splitters, combiners and frequency converter products for both passive and active applications covering frequencies from 50MHz - 2150MHz.

RF Module

The Foxcom VSAT DC Block has been designed to block any incoming DC on an L band system and insert any DC voltage up to 48V @ 5A. The unit has negligible L-band through loss. DC is injected via the filtered soldered connector.

The Foxcom 10MHz Extractor / Inserter is used to extract, and/or Insert a 10MHz reference signal and DC onto an L-Band path in VSAT systems.

The Foxcom 10MHz Extractor / Inserter is used to extract, and/or Insert a 10MHz reference signal and DC onto an L-Band path in VSAT systems.

The Foxcom VSAT BIAMPTX amplifies the L-Band signal from the Modem to the Block-Up Converter. Additionally the 10MHz Reference signal is also amplified.

The Foxcom VSAT BIAMPRX amplifies the L-Band signal from the LNB to the modem. Additionally the 10MHz Reference signal is also amplified if carried on the RX path.

The Foxcom UHF/IF 8-Way Passive Combiner/Splitter has been designed to combine or split a UHF or IF signal. The unit can be used in either configuration as a splitter or combiner.

The Foxcom UHF/IF 4-Way Passive Combiner/Splitter has been designed to combine or split a UHF or IF signal. The unit can be used in either configuration as a splitter or combiner.

The Foxcom UHF / IF Band 2-Way Passive Combiner/Splitter has been designed to combine or split UHF or IF signal. The unit can be used in either configuration as a splitter or combiner.

The Foxcom L-Band 8-Way Passive Combiner/Splitter has been designed to combine or split the L-Band from a typical satellite system. The unit can be used in either configuration as a splitter or combiner.

The Foxcom L-Band 4-Way Passive Combiner/Splitter has been designed to combine or split the L-Band from a typical satellite system. The unit can be used in either configuration as a splitter or combiner.